Product Details

Solar Sign Solutions and DIY Billboard Lights created a solar sign kit that was specifically designed for your needs. The technicians at DIYBillboardLights put in the time and effort needed to research and development a kit that was designed for your specific solar zone, the size of your sign, and the hours that are required for the illumination of your sign. The time that was spent allowed DIY Billboard Lights to create a hand picked kit that is specific to your location and size of your sign.

The Solar Sign Light kits come with a 10 year warranty. These kits are a simple DIY installation and only require the purchase of the recommended battery. To install these kits you will only need a drill, drill bits, level, tape measure, wire strippers, and a screw driver. You will have to provide the anchoring hardware for the control box and gooseneck mounting brackets.

Solar Sign Solutions and DIY Billboard Lights believe in making products that benefit our environment. The long life span of led lights combined with the use of solar panels to recharge the batteries make this kit very eco-friendly. Also with the dual timer that is built into the light controller you will to control the duration when the lights turn on after sunset and before sunrise.

Kit Includes

*Kits rated for more that 4 hours of nightly use will come with larger solar panels and in most cases will require a larger battery.

Batteries can be found at most retailers: Home Depot, Pep Boys, Wal-Mart, or Sears

This outdoor sign lighting kit was designed from the ground up to simple to install and wire. Installing the professional quality light brackets is as easy as hanging a shelf and the provided wiring instructions make this as easy as wiring Malibu patio lights. The low voltage wiring does not require a professional to install the wiring and can be done in a matter of minutes. The professional quality finishes in the Solar Sign Solutions Sign Lighting kit ensure professional quality results with the ease of a DIY installation.

This is a low maintenance and only require the occasional cleaning of the solar panel. It is recommended that you clean off the solar panel at least one per month to remove any built up dust and dirt.

When installing your solar panel it is necessary that you install it as high as you can to avoid any shadowing from trees and buildings. If you do not do this, the shadows casted on the solar panel will prevent the panel from properly charging the battery. Also the panel must be facing south and angled roughly 45%.

Each 10 watt LED flood light will produce up to 850 lumens per flood light. DIY Billboard Lights This kit was designed to have at least 3 days of reserve power to illuminate your sign. If you need additional reserve power, please call our support staff so we may customize a kit for you.

To sufficiently power your lighting kit, we have recommend the size and quantity of batteries needed for each light kit. We have calculated the amperage draw for each light kit and determined what size and quantity of batteries will allow for the proper run time while having at least 3 days of reserve power.

Professional Quality Control Unit

The combo low voltage cutoff, solar charge controller, and timer make wiring of this kit very simple and straight forward. Low voltage cutoffs are a crucial aspect to a properly maintained solar system. The purpose of having a low voltage cutoff is to protect your battery from discharging below the safe zone. This will help extend the life of the battery. Most retailers neglect adding a low voltage to their solar powered light kits, but our expert technical staff at Solar Signs Solutions fully understands solar power systems and their requirements. This expert knowledge was used in picking components that would create a simple, yet well designed lighting kit.

Mounting Brackets

The gooseneck mounting brackets for the LED flood lights are made from 6061-T6 aluminum. 6061-T6 aluminum is very durable. We chose to use 6061-T6 aluminum for our mounting brackets because of the strength of the alloy and it rust free qualities. Also we powder coat these mounting brackets to ensure the durability of the brackets.

This billboard lighting kit was designed with cost savings in mind. These lights do not require a power line to be ran from the office building out to the sign, and the LED flood light have a very high lifespan. This kit is a easy DIY installation and will only take a few hours to install with the proper planning. We have helpful installation videos and a knowledgeable staff standing by 7 days a week to answer any questions about the install.